Jeohunter

3,598.00 

Out of stock

Compare

Description

Equivalent
to
GPR georadar jeohunter metal detector.

PERFECT FOR LOCATING GOLD, VOIDS, DEPOSIT, NUGGETS, COINS


The said ground setting
may be provided easily in a few steps with the and – buttons in the
Jeohunter and as it is possible to observe whether the signal penetrates
into the soil or not, the risk of searches with signals not penetrating
into the ground is eliminated. The final operation of the ground setting
made will be taken as the reference by the system and the ground effect
is quantified in the display; so an opportunity is provided for
automatic scanning with no need for the user to enter another ground
setting for the same ground structure the next time.

Note: Before entering any ground settings or at any position, the user may
increase or decrease the “accuracy – sound – display light” settings or may
benefit from the option to perform a search without seeing the invaluable metals
by using the option of accepting and refusing the invaluable metals. What should
be done for this purpose is to enter the settings by pressing the settings
button on the system board and confirming with – or buttons. Then the
confirmation button is pressed and the general search mode with metal sorting is
passed.


High Accuracy and Target Creation in Sorting Metals

Jeohunter compares the signals from many different systems
known up to now in detecting the spaces for detecting and sorting metals and
reads the signature spectrum for the targets in signal structure and conveys the
data related to the target in the most accurate manner.

Jeohunter creates the target form and has linear bars showing the data for 4
targets at the same time by percentages in a single display. Thanks to this
feature, different metals and space and the gold and valuable metals in space
can be detected and also percentage data is shown related to the target quantity
by proportioning. The images show the formations, target types and proportions
related to the fund targets.

If we clarify what the oscilloscope displays in the images
mean, we will understand the importance of the oscilloscope displays better.

When paid attention, there is a white reference line extending horizontally just
in the middle of the oscilloscope window and another red line showing the target
effects. If the red line is below the reference line, it means that there is a
space. If it is formed on the line, it means that this is a metal and the
drawings for both the space and metals give the view of the target from above.

The valuable-invaluable space percentages above the linear bars, on the hand,
give the results of these images for the width and intensity effects.

Real Time 3D Images Equivalent to GPR Technology.

As known, it is impossible to obtain real-time 3D images in
many of the technologies known as ground penetrating radar systems. Moreover, it
is impossible to sort metals.

Jeohunter makes real time detections and immediately creates images of these
detections. Thanks to this report, the target types and proportions are also
communicated in it in addition to the target dimensions.

In order to receive a 3D image report, the user needs to press the scan button
on the detected target and attach the search antenna. Upon exit from the target,
the analysis report with 3D image will be displayed as soon as the scan button
is released. Analysis reports regarding different targets are given in the
images.

To make an explanation though the images and reports clearly
reveal the results, red means metal; orange, yellow and blue shades on the edges
of the metal, on the other hand, show the magnetic field and spaces around the
target. For example, the first image shows the target being metal and gold, the
other image shows space by 80% and valuable metal by 15% with it, the other
image shows invaluable metal by 13% with a second valuable metal accompanying it
by 66%, the analysis with blue image shows the space and the one next to it
shows valuable target by 90% in space.

Image Reporting of Target Diameter and Depths

Jeohunter detects the diameter, size and depth of the targets
in a surprisingly accurate manner and performs an operation that can is
described as difficult and impossible by presenting a report with all the
details and images.

to create a target depth report with image, the user should
get the antenna close to the starting points of the target signal from four
sides of the detected target and should mark the signal starts on the ground;
and then should save the data relating to the width and length of the target
that appears in the depth window, which appears when the depth button is
pressed; the next operation when saving is done is to press the scan button,
getting the search antenna up to the end of the signal over the target. At the
end of the target, when the scan button is released, the relevant analysis
report will be displayed on the screen in real time.

The images show some of the screen shots from the help video file in the system
related to the analysis reports for various target depths and sizes and also
related to how to measure the target diameters.


Saving Target Images and Analysis Reports

Jeohunter is capable of
archiving the analysis reports with images saved in its library forever
in files. The user saves the images containing the detailed analysis
reports of the targets that the user wants to save and is offered the
advantage of watching and examining them whenever and in any wanted
environment on the own colour screen of the Jeohunter with no need for a
laptop or similar screens or apparatuses.

The images wanted for saving can be saved pretty easily. All the user
has to do for that purpose is to save the analysis report containing the
images and details for the detected target by pressing the save button
on the system command button, thus with a single operation. Just by
pressing and releasing the save button, the contents of the saved images
and details are automatically included in the archive and the position
number is displayed on the save window. The user has the opportunity and
advantage of watching all the saved images whenever the user wants to by
using – and buttons. The user may also delete the information in the
records and may save other images whenever desired. For this purpose, it
is sufficient to respond to the question “Do you want to delete?” by
scrolling between yes and no using – and buttons and confirming
deletion.

VIVAX GROUP LTD. IS OFFICIAL DEALER OF GEOHUNTER FOR BULGARIA


Additional information

Weight 10.00 kg

1 review for Jeohunter

  1. Ivan Galabarov

    Zdraveite..moga li da znam dali v skoro vreme she ima movie s tozi skener za da vidim kak raboti,chudq se dali e dobar.. .. ;
    )

Add a review

Your email address will not be published. Required fields are marked *

X